ADTRAN OPTI-6100 4184001L1(1184001L1 + (2)1184002L1) DIRECT REPLACEMENT NEW!!!

Description

**NEW OC3 to 3 DS3's MUX/CONVERTER, FULLY REDUNDANT!!**
OPTI-3 Wallmount Chassis (WMC) with Redundancy
Part Number:
4184001L1
Total Access OPTI-3 Single OC-3 to Three DS3
The ADTRAN Total Access® OPTI-3TM sets a new mark for OC-3 multiplexers,delivering three DS3 circuits from a single OC-3 feed. Designed to meet the growing demand for DS3 deployment in today?s economy, the Total Access OPTI-3 eliminates the need for expensive SONET multiplexer equipment in terminal mode applications and provides the fullest use of OC-3 capacity.
The Total Access OPTI-3 is interoperable with other SONET devices complying with GR-253 for easy deployment in new and existing SONET networks. A carrier-class device, the Total Access OPTI-3 meets the needs of applications that require extended temperature range operation such as remote terminals. The fully integrated design supports optional redundancy and is easily managed with support for TL1 commands over the Data Communications Channel (DCC). Additional management features include a local craft interface, remote alarm transport via DCC, and alarm reporting to legacy alarm systems. Front panel LEDs conveniently display status information.
The unit requires only a fraction of the footprint normally needed for optical deployments. The Total Access OPTI-3 occupies standard slots in either a small two rack unit high wallmount chassis (WMC) or a spacesaving one rack unit high rackmount chassis (RMC). The Total Access OPTI-3 can also be configured to operate redundantly with optional protection. It can upgrade online from unprotected to protected status.
The DS3 BNC coax connectors are located on the rear of the Total Access OPTI-3 chassis. This permits easy access to the customer side of the network for a convenient demarcation point, or to extend services to DS3 multiplexer applications. The fiber optics enter the chassis from the front of the unit and terminate on the card with a dual SC connector for simple installation. The unit provides for external auxiliary alarm inputs, and the RMC chassis provides additional alarm outputs for CO alarms.
Product Features:
One GR-253 compliant OC-3 port, three DS3 ports
1+1 optical and 1:1 electrical protection, 1+1 SONET Automatic Protection Switch (APS)
Interoperable with industrystandard SONET multiplexers
Two or, with redundancy, four SM fibers at 1310 nm over a 40 km range or 1550 nm over an 80 km range
DS3 signals, channelized/ unchannelized
Space-saving wallmount chassis (WMC) or a one rack unit high 19-in. or 23-in. rackmounted chassis (RMC)
Single card, hot swappable solution increases reliability and reduces cost
Management functions over the DCC, TL-1 (including GNE), and SNMP
Local craft port interface for local management and Telnet for remote menu operation
Telcordia OSMINE compliant and NMA (via DCC) supported
Alarm history
Management of subtended units via IP/DCC
NEBS Level 3 compliant
Industry-leading 10-year warranty